The Reliance Controls 10-circuit 50 Amp transfer switch features a patented design, making it the first easy-to-install, pre-wires loadside transfer switch with interchangeable 15-, 20-, and 30 Amp 1-inch circuit breakers. Designed for use with up to 12,500-watt generators, the transfer switch can handle a double-pole, 30 Amp circuit for powering central air conditioning, water heaters or large well pumps, while retaining the easy-to-use toggle switch control panel. It includes six 15-to-20 Amp, two 20 Amp DP, and two 30 Amp DP circuit breakers; two removable tie bars for 240 volt circuits; analog wattmeters to measure generator load; and a patented built-in wiring compartment. This unit is cUL 1008 listed and covered by a 5-year limited warranty.

The GenTran two-circuit generator transfer switch for up to 12,500-watt generators is an ideal way to keep a 50 Amp 120/240-volt circuit running during a blackout. It comes prewired and installs indoors, next to your load center. The ground post is incorporated in the enclosure, and three combination 1/2-inch and 3/4-inch knockouts on the sides and back make wiring fast and easy. When your power goes off, you'll connect a power cord from your generator to the inlet on the transfer switch and start your generator. Switch the utility breaker off, slide over the interlock, and switch the generator breaker on. When utility power is restored, simply do the reverse, then shut down and store your generator.

When power is out and you need a generator to keep your lights, refrigerator, furnace and microwave running, the Gen/Tran Switch is a real home saver! Individual circuit protection. Wattage meters for balancing your load requirements. Wiring harness with 24in. of flexible conduit. Required main breaker in load center: 50 Amp. Consult a qualified electrician. 14 3/8in. W x 11 1/2in. L x 3 3/8in. D. UL listed. U.S.A.

The Reliance Controls 50-200 Amp utility subpanel is designed for use with generators up to 12,500 watts. It can replace a standard, full 200 Amp service panel as a generator-ready full panel. It includes a 200A main circuit breaker interlinked with 30 Amp to 125 Amp generator circuit breaker. The interlinked circuit breakers keep the generator isolated from the utility at all times, even with the cover or deadfront removed. It features a heavy-duty copper bus. This unit is suitable for service entrance and provides for 36 branch circuits. It is covered by a 5-year warranty.

Compatible with Generac, Briggs, Kohler, Pramac and Winco automatic start generatorsOvation™ Series Automatic Transfer Switch Model ATS1001D features 100 amp Utility and 100 amp Generator mains mechanically interlocked and housed in a NEMA 1 service entrance-rated load center. Accommodates up to 14 household circuits and generators up to 25 kW. Ideal for retrofit installations behind an existing load center, but can also be installed as the main load center in a smaller home, cabin or vacation home. NEMA 1 cabinet can be flush or surface mounted indoors. Compatible with virtually any stationary generator up to 25 kW. Includes 10,000 AIC rated mains. 22,000 AIC rated mains available. (See Model ATS1001D-22.)Accepts interchangeable type branch circuit breakers from Siemens, Square D (HOM), Cutler-Hammer (BR) and GE (THQL). Also accepts Arc fault, GFCI and Surge Suppression breakers. Up to three optional PowerPause™ Load Management mod

"RELIANCE CONTROLS CORP." RAINTIGHT OUTDOOR POWER INLET BOX 30 Amp Raintight Outdoor Power Inlet Box For Generator Power Cord Connection Inlet Box Can Be Hardwired Directly To Reliance Transfer Switches Or Panels Eliminating The Need For Power Cords Running Through Open Doors Or Windows NEMA 3R Rated Enclosure L14-30 Twist Lock Plug Configuration Made In USA

6 circuits, 30 amp, 125 volt indoor manual transfer switch for generators up to 3750 watts. Includes L5-30 male power inlet and wattmeters to help balance generator load. Expandable to 16 circuits. For surface or flush mounting indoors, for hardwiring or plug-in generator connection. Use two Honda EU2000i generators in parallel with our Parallel Power Kit Model 30501.

Built for generators up to 7500 watts. Features 6 large toggle switches that provide easy, safe control of 6 125 volt circuits, backup pushbutton breakers for each circuit, a steel tie bar that allows a 240 volt circuit to be hooked up, dual wattage meter s that monitor the appliance load on your generator, a built-in L14-30, 30-watt power cord inlet, completely pre-wired conduit that attaches quickly to load center. Full-color packaging. UL1008 Listed.

Standard Power Inlet. Twist Locking, 30 Ampere 125 Voltage. Marine grade UV stabilized Glass-filled polyester construction. Smart Locking System. Watertight Cap. 4-way right angle rear safety enclosure with strain relief. Shore Power warning label on cap. Configuration NEMA L5-30P

For generators up to 15,000 Watts and utility input of 100 Amps, this panel can be used as a smaller main panel for a home or cabin, or as a subpanel for a larger building. Interlinked circuit breakers keep the generator isolated from the utility at all times. Accommodates 12 to 20 common circuit breakers to control a variety of appliances and devices. Heavy-duty steel cabinet with steel door covering circuit breakers. Indoor surface or flush-mount design. UL listed. 5-year limited warranty. U.S.A. Factory shipped. Circuits (qty.): 12 - 20, Amps: 60 - 100, Watts: 15,000, UL Listed: Yes