|
It's a terrific way to use unused space with ease and safety. Unique rope locking mechanism prevents accidental release. Ingenious design lightens the load for easy lifting. For use on ceilings up to 14' load capacity 50 lb. Solid steel construction with
The RacorPro PBH-1R Ceiling Mounted Bike Lift allows you to take advantage of unused ceiling space to store your bike. Installation takes only a matter of minutes, and with its ingenious pulley system, raising and lowering your bike couldn't be easier. The lift lets you free up precious storage space on the floor, all while keeping your bike stored away safely until you're ready to ride.  | The RacorPro PBH-1R Ceiling Mounted Bike Lift:- Installs easily in just minutes.
- Employs solid-steel construction for exception durability.
- Makes it simple to raise and lower your bike.
- Frees up floor space in your home.
| 
|
|
Create more floor space in your home by getting your bike off the ground. View larger. | 
The RacorPro PHL-1R takes only minutes to install. |
Easy-to-Install Pulley System Frees up Floor Space
The PBH-1R uses a pulley system that makes it easy to raise and lower bikes weighing up to 50 pounds. The system can be installed on ceilings as high as 14 feet, and the unique rope locking system ensures that the rope stays locked in place when not in use. Storing your bike off the floor not only protects your bike from damage, but it frees up valuable floor space, helping to keep your space tidy and better organized. Installing the Racor PBH-1R is a breeze, and you can have it completed within a matter of minutes. The only tools necessary for installation are a Phillips head screwdriver, a drill with a 1/8" bit, a tape measure, and a stud finder (for ceilings with drywall). The easy-to-follow instructions will have your Ceiling Mounted Bike Lift ready to go in just five easy steps. Solid-Steel Construction for Durability
The PBH-1R is built to last. All of its included hardware is constructed from solid steel for maximum durability and toughness. The locking mechanism, pulleys, rope cleat, and lift mechanism offer smooth performance for years to come. The included 48-foot lift rope is also extremely durable, and it provides plenty of excess length for ceilings up to 14-feet high. Easy Raising and Lowering with Minimal Effort
The PBH-1R makes it a breeze to raise and lower your bike from its ceiling-mounted position. The pulley system handles the brunt of the force, so it requires very little effort on your part. Simply hook the bike handlebar and seat to the included hooks and pull the lift rope to raise the bike to its ceiling-mounted storage position. With each pull, the locking mechanism locks into place to eliminate accidental drops. Store the excess rope on the included rope cleat to keep it nice and tidy. The RacorPro PBH-1R Ceiling Mount Bike Lift measures 10.24 x 5.12 x 3.5 inches (packaged) and weighs just 3.64 pounds (packaged). All included components feature a black finish. What's in the Box
Two lift assemblies, two hook pulleys (one with locking mechanism), 48-foot rope, one rope cleat, 10 two-inch wood screws.
|
|
Racor PBH-1R Ceiling-Mounted Bike Lift
4.5 / 5.0 (238 ratings)
$12.50
|
Cedar Potting Bench Our Cedar Potting Bench provides ample space for gardening jobs and other home projects. This Potting Bench has a drawer and upper shelf that keeps small items handy. The sturdy lower shelf of the Potting Bench holds larger and heavier items. A tub...
Cypress Porch Swing Swings These are handmade cypress porch swings. The design I made myself. They are extra sturdy, and our prices cant be beat. Check out the website today!
La Crosse Technology WS-9611U-IT Wireless Sun/Moon Forecast Station with Oscar Outlook The La Crosse Technology WS-9611U-IT(TBP)Wireless Sun/Moon Weather Station with 15 Advanced Forecast Icons helps you prepare for your day and decide what to wear. This unit also displays sunrise/sunset for 99 cities along with moon phase. In addition, it displays indoor temperature and humidity, and outdoor temperature. Time is set by the U.S. atomic clock. Compatible with La Crosse Technology TX29U-IT 915 MHz Wireless Temperature Sensor.
La Crosse Technology BC-700 Alpha Power Battery Charger The La Crosse Technology BC700 Alpha Power Battery Charger has four modes and charges all NiCd and NiMH AA and AAA rechargeable batteries. The four modes include charge, discharge (discharges the batteries and then recharges them), recharge (discharges and recharges up to 20 times to bring old batteries back to life) and test (displays the battery capacity). BC-700 Battery Charger " Features: • All modes automatically default to 200 mA charge on the BC-700 Battery charger • Charge both AA and AAA rechargeable batteries simultaneously and will charge all Low-Discharge batteries. Sanyo Eneloop, Uniross Hybrio, Nexcell EnergyOn, Accupower Acculoop and other future low discharge batteries. • Hhas Four independent channels - Charges 1, 2, 3 , or 4 rechargeable batteries at a time. • Overheat detection to protect over-charging and LCD shows capacity for each battery when charging is complete • Charge Mode - allows a range of user selectable milliamp settings from 200 to 700 for faster charging times. Within 4 seconds after rechargeable batteries are inserted charging automatically begins at 200mA, or you may select 500, or 700mA charge rates for faster charging times. • Discharge Mode - reduces memory effect by discharging rechargeable battery completely before recharging to full capacity. User selectable. • Refresh Mode - discharges and recharges up to 20 cycles or until rechargeable battery is refreshed to full capacity. User Selectable. • Test Mode- First charges the rechargeable battery to full capacity, then discharges completely to measure rechargeable battery capacity for display in mAh or Ah, and then recharges each rechargeable battery to full battery capacity. • UL approved, BC 700 charger also has safeguards that sense rechargeable battery polarity, rechargeable battery temperature and defective rechargeable batteries. • World Voltage capable - Operates on 100~240V AC Input.
La Crosse Technology Projection Alarm Clock with Outdoor Temperature This Projection Alarm Clock sets to the U.S. atomic clock to maintain absolute time accuracy. It also monitors indoor temperature and humidity, and outdoor temperature with a wireless sensor. The projection arm projects time and/or outdoor temperature onto the wall or ceiling (projection can be rotated). The time alarm with snooze keeps you always on time. Tip if you have trouble getting the sensor to work: 1.Bring both units inside and have the units 3-5 feet apart with nothing in-between them. 2.Remove the batteries from both units. 3.Press one of the buttons on the display at least 20 times to clear all memory. Verify that the display is blank before proceeding. 4.Using a good quality alkaline battery place them back into the remote sensor; making sure they are installed according to the diagrams in the battery compartment. Next, taking care not to press any buttons, reinstall the batteries in the display according to the diagram in the battery compartment. 5.Do not press any buttons for at least 15 minutes after installing the batteries. (Let them establish a good connection.) 6.An outdoor temperature should be showing on your display. You can now put your outdoor sensor back outside
200 TC Percale Solid Euro Twin 17"" Deep Pocket Bed Fitted Sheet in Black,Navy 200TC Percale Solid Color Bedding at Ambience Linen: 50% cotton 50% polyester. Full range colors available. Duvet covers are zipper closed. Bed skirts are tailored and split at corners. Machine washable, dry low.
